CR Magnetics Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
CR6211-150-20
Lihat Detail Lembar Data

CR6211-150-20

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage
Package: TO-220
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Bulk packaging, 50 units per pack

Specifications

  • Input Voltage: 4.5V to 26V
  • Output Voltage: 1.2V to 24V
  • Output Current: 1.5A
  • Dropout Voltage: 0.3V at 1.5A
  • Line Regulation: 0.05% typical
  • Load Regulation: 0.1% typical
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. Vout (Output Voltage)
  3. GND (Ground)

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Reverse battery protection

Advantages and Disadvantages

Advantages: - High precision regulation - Wide input voltage range - Compact TO-220 package - Thermal protection for reliability

Disadvantages: - Higher dropout voltage compared to some alternatives - Limited output current compared to higher power regulators

Working Principles

The CR6211-150-20 is a linear voltage regulator that uses a feedback loop to maintain a stable output voltage regardless of changes in the input voltage or load current. It achieves this by dissipating excess power as heat, resulting in a dropout voltage that limits the minimum input-output voltage differential.

Detailed Application Field Plans

The CR6211-150-20 is suitable for various applications requiring a stable voltage supply, such as: - Battery-powered devices - Automotive electronics - Industrial control systems - Portable consumer electronics

Detailed and Complete Alternative Models

  1. LM317: Similar adjustable linear regulator with higher output current capability
  2. LM1117: Fixed voltage regulator with lower dropout voltage for battery-powered applications
  3. LT1086: Adjustable regulator with lower dropout voltage and higher output current for demanding applications

This content provides a comprehensive overview of the CR6211-150-20 voltage regulator, covering its specifications, features, advantages, and application fields within the specified word count.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan CR6211-150-20 dalam solusi teknis

  1. What is CR6211-150-20?

    • CR6211-150-20 is a specific model of a component or device used in technical solutions, typically in electronic or electrical systems.

  2. What are the key specifications of CR6211-150-20?

    • The key specifications of CR6211-150-20 include its voltage rating, current capacity, operating temperature range, and physical dimensions.

  3. How is CR6211-150-20 typically used in technical solutions?

    • CR6211-150-20 is commonly used as a power regulator, voltage stabilizer, or current limiter in various electronic and electrical applications.

  4. What are the common challenges when integrating CR6211-150-20 into a technical solution?

    • Common challenges may include thermal management, compatibility with other components, and ensuring proper electrical connections.

  5. Are there any recommended best practices for incorporating CR6211-150-20 into a technical design?

    • Best practices may include following the manufacturer's guidelines, conducting thorough testing, and considering the impact on overall system performance.

  6. What are the potential alternatives to CR6211-150-20 for similar technical applications?

    • Alternatives may include different models from the same manufacturer, equivalent components from other brands, or alternative circuit designs.

  7. What are the typical failure modes or issues associated with CR6211-150-20?

    • Typical failure modes may include overvoltage damage, overheating, or component degradation over time.

  8. How can one troubleshoot issues related to CR6211-150-20 in a technical solution?

    • Troubleshooting may involve checking input/output voltages, inspecting for physical damage, and verifying proper connections.

  9. What are the environmental considerations when using CR6211-150-20 in technical solutions?

    • Environmental considerations may include temperature limits, humidity resistance, and compliance with relevant regulations.

  10. Where can one find additional resources or support for working with CR6211-150-20 in technical solutions?

    • Additional resources may be available through the manufacturer's documentation, online forums, or technical support channels.