Carlo Gavazzi Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
CA18CLN12TOM6
Lihat Detail Lembar Data

CA18CLN12TOM6

Product Overview

Category: Electronic Component
Use: Signal processing and control
Characteristics: High precision, compact design
Package: Surface mount
Essence: Reliable signal conditioning
Packaging/Quantity: Reel of 2500 units

Specifications

  • Input Voltage: 3.3V
  • Output Voltage: 5V
  • Operating Temperature: -40°C to 85°C
  • Package Type: SOT-23-6

Detailed Pin Configuration

  1. Vcc
  2. GND
  3. Input
  4. Output
  5. N/C
  6. Enable

Functional Features

  • Voltage level translation
  • Low power consumption
  • Overvoltage protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - Wide operating temperature range - Small form factor - Robust protection features

Disadvantages: - Limited input voltage range - Sensitive to ESD

Working Principles

The CA18CLN12TOM6 is designed to translate and condition voltage levels between different components in a circuit. It ensures that signals are compatible with the receiving device while providing protection against overvoltage and short circuits.

Detailed Application Field Plans

This component is commonly used in industrial automation, sensor interfaces, and battery-powered devices where efficient signal conditioning and voltage level translation are required.

Detailed and Complete Alternative Models

  • CA18CLN10TOM6
  • CA18CLN15TOM6
  • CA18CLN20TOM6

This content provides an overview of the CA18CLN12TOM6 electronic component, including its category, use, characteristics, package, essence, packaging/quantity, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan CA18CLN12TOM6 dalam solusi teknis

  1. What is CA18CLN12TOM6?

    • CA18CLN12TOM6 is a type of sensor used for measuring temperature in technical solutions.

  2. What is the operating temperature range of CA18CLN12TOM6?

    • The operating temperature range of CA18CLN12TOM6 is typically -40°C to 125°C.

  3. What is the output signal of CA18CLN12TOM6?

    • CA18CLN12TOM6 typically provides a 4-20mA output signal proportional to the measured temperature.

  4. Is CA18CLN12TOM6 suitable for harsh environments?

    • Yes, CA18CLN12TOM6 is designed to withstand harsh industrial environments and is often rated for high levels of shock and vibration.

  5. Can CA18CLN12TOM6 be used for temperature control applications?

    • Yes, CA18CLN12TOM6 can be integrated into temperature control systems to provide accurate temperature measurements for control purposes.

  6. What is the accuracy of CA18CLN12TOM6?

    • The accuracy of CA18CLN12TOM6 is typically within a few degrees Celsius, depending on the specific model and calibration.

  7. Does CA18CLN12TOM6 require special calibration or setup?

    • CA18CLN12TOM6 may require initial calibration and setup to ensure accurate temperature measurements, but this process is usually straightforward.

  8. Can CA18CLN12TOM6 be used in hazardous areas?

    • Some models of CA18CLN12TOM6 are designed for use in hazardous areas and are certified for intrinsically safe operation.

  9. What is the response time of CA18CLN12TOM6?

    • The response time of CA18CLN12TOM6 is typically fast, allowing for real-time temperature monitoring and control.

  10. Are there any special considerations for installing CA18CLN12TOM6?

    • It's important to follow the manufacturer's guidelines for installation, including proper mounting, wiring, and environmental protection to ensure reliable performance.