QD Devices Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
ADM232LAR
Lihat Detail Lembar Data

ADM232LAR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Level Translator
  • Characteristics: High-speed, low-power, RS-232 compatible
  • Package: 16-pin SOIC (Small Outline Integrated Circuit)
  • Essence: Translates voltage levels between RS-232 and TTL/CMOS logic levels
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: +5V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 120 kbps
  • Number of Channels: 2
  • Input Logic Levels:
    • RS-232: ±3V to ±15V
    • TTL/CMOS: 0V to +5V
  • Output Logic Levels:
    • RS-232: ±5V
    • TTL/CMOS: 0V to +5V

Detailed Pin Configuration

  1. VCC - Power supply input (+5V)
  2. GND - Ground
  3. T1IN - Channel 1 TTL/CMOS input
  4. T1OUT - Channel 1 TTL/CMOS output
  5. R1OUT - Channel 1 RS-232 output
  6. R1IN - Channel 1 RS-232 input
  7. R2IN - Channel 2 RS-232 input
  8. R2OUT - Channel 2 RS-232 output
  9. T2OUT - Channel 2 TTL/CMOS output
  10. T2IN - Channel 2 TTL/CMOS input
  11. C1+ - External capacitor connection for channel 1
  12. C1- - External capacitor connection for channel 1
  13. C2- - External capacitor connection for channel 2
  14. C2+ - External capacitor connection for channel 2
  15. V- - Negative voltage supply for RS-232 drivers
  16. V+ - Positive voltage supply for RS-232 drivers

Functional Features

  • Bi-directional voltage level translation between RS-232 and TTL/CMOS logic levels
  • Suitable for interfacing microcontrollers, UARTs, and other devices with different voltage levels
  • Supports data rates up to 120 kbps
  • Low power consumption
  • ESD (Electrostatic Discharge) protection on all pins

Advantages

  • High-speed operation
  • Wide operating temperature range
  • RS-232 compatibility ensures compatibility with a wide range of devices
  • Small form factor package allows for space-efficient designs
  • ESD protection enhances reliability

Disadvantages

  • Limited number of channels (2)
  • Requires external capacitors for proper operation
  • Not suitable for high-speed applications exceeding 120 kbps

Working Principles

The ADM232LAR is based on charge pump technology, which generates the required voltage levels for RS-232 communication from a single +5V supply. It uses internal switches and capacitors to create positive and negative voltages needed for RS-232 signaling. The TTL/CMOS logic levels are directly translated without any additional circuitry.

Detailed Application Field Plans

  • Industrial automation systems
  • Networking equipment
  • Point-of-sale terminals
  • Medical devices
  • Test and measurement instruments
  • Consumer electronics

Alternative Models

  1. MAX232: Similar functionality, available in various packages
  2. LTC1387: Enhanced ESD protection, higher data rate support
  3. SP3232: Lower power consumption, wider supply voltage range

Note: This is not an exhaustive list, and there are several other alternative models available in the market.

This entry provides a comprehensive overview of the ADM232LAR voltage level translator. It covers the product's basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan ADM232LAR dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of ADM232LAR in technical solutions:

  1. Q: What is ADM232LAR? A: ADM232LAR is a dual RS-232 driver/receiver IC that converts TTL/CMOS logic levels to RS-232 voltage levels.

  2. Q: What is the purpose of using ADM232LAR in technical solutions? A: ADM232LAR is commonly used to interface microcontrollers or other digital devices with RS-232 communication ports.

  3. Q: What is the operating voltage range of ADM232LAR? A: ADM232LAR operates within a voltage range of +4.5V to +5.5V.

  4. Q: Can ADM232LAR be used for bidirectional communication? A: No, ADM232LAR is a unidirectional driver/receiver. For bidirectional communication, two ADM232LAR chips are required.

  5. Q: What is the maximum data rate supported by ADM232LAR? A: ADM232LAR supports data rates up to 120 kbps.

  6. Q: Does ADM232LAR require external capacitors? A: Yes, ADM232LAR requires four external capacitors for charge pump operation.

  7. Q: Can ADM232LAR handle multiple RS-232 devices simultaneously? A: Yes, ADM232LAR can be used to interface multiple RS-232 devices by connecting each device to separate driver/receiver pairs.

  8. Q: Is ADM232LAR compatible with 3.3V logic levels? A: No, ADM232LAR is designed for TTL/CMOS logic levels and is not directly compatible with 3.3V logic. Level shifters may be needed.

  9. Q: Can ADM232LAR be used in industrial environments? A: Yes, ADM232LAR is suitable for industrial applications as it operates within a wide temperature range and has ESD protection.

  10. Q: Are there any alternatives to ADM232LAR for RS-232 interfacing? A: Yes, there are other ICs available such as MAX232, SP232, or LTC1380 that can be used as alternatives to ADM232LAR.

Please note that these answers are general and may vary depending on specific application requirements.