QD Devices Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
ADG904BRUZ
Lihat Detail Lembar Data

ADG904BRUZ

Product Overview

Category

ADG904BRUZ belongs to the category of analog switches.

Use

It is primarily used for signal routing and switching applications in electronic circuits.

Characteristics

  • Low power consumption
  • High precision
  • Fast switching speed
  • Wide operating voltage range

Package

ADG904BRUZ comes in a small outline integrated circuit (SOIC) package.

Essence

The essence of ADG904BRUZ lies in its ability to provide efficient signal routing and switching capabilities, enhancing the performance of electronic circuits.

Packaging/Quantity

ADG904BRUZ is typically packaged in reels and is available in quantities of 2500 units per reel.

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • On-Resistance: 4 Ohms (typical)
  • Off-Leakage Current: 1nA (typical)
  • Switching Time: 20ns (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

ADG904BRUZ has a total of 16 pins arranged as follows:

  1. Pin 1: VDD (Positive Power Supply)
  2. Pin 2: IN1 (Input Control Signal 1)
  3. Pin 3: IN2 (Input Control Signal 2)
  4. Pin 4: IN3 (Input Control Signal 3)
  5. Pin 5: IN4 (Input Control Signal 4)
  6. Pin 6: GND (Ground)
  7. Pin 7: COM (Common Terminal)
  8. Pin 8: NO1 (Normally Open Terminal 1)
  9. Pin 9: NC1 (Normally Closed Terminal 1)
  10. Pin 10: NO2 (Normally Open Terminal 2)
  11. Pin 11: NC2 (Normally Closed Terminal 2)
  12. Pin 12: NO3 (Normally Open Terminal 3)
  13. Pin 13: NC3 (Normally Closed Terminal 3)
  14. Pin 14: NO4 (Normally Open Terminal 4)
  15. Pin 15: NC4 (Normally Closed Terminal 4)
  16. Pin 16: VSS (Negative Power Supply)

Functional Features

  • Four independent analog switches
  • Low on-resistance and leakage current
  • Break-before-make switching action
  • Wide operating voltage range
  • ESD protection

Advantages and Disadvantages

Advantages

  • Low power consumption
  • High precision in signal routing
  • Fast switching speed
  • Wide operating voltage range allows for versatile applications

Disadvantages

  • Limited number of channels (four in this case)
  • Relatively small package size may limit use in certain applications requiring higher channel counts

Working Principles

ADG904BRUZ operates based on the principle of field-effect transistors (FETs) as switches. When the control signals are applied to the input pins, the corresponding switches are activated, allowing the signal to pass through from the common terminal to the desired output terminal.

Detailed Application Field Plans

ADG904BRUZ finds applications in various fields, including but not limited to: 1. Audio and video signal routing in multimedia systems 2. Data acquisition systems 3. Communication equipment 4. Industrial automation 5. Medical devices 6. Test and measurement instruments

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ADG904BRUZ include: 1. ADG901BRUZ 2. ADG902BRUZ 3. ADG903BRUZ 4. ADG905BRUZ

These models provide different channel counts and package options, allowing users to choose the most suitable option for their specific application requirements.

Word count: 464 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan ADG904BRUZ dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of ADG904BRUZ in technical solutions:

  1. Q: What is ADG904BRUZ? A: ADG904BRUZ is a specific model of analog switch IC (Integrated Circuit) manufactured by Analog Devices.

  2. Q: What is the purpose of ADG904BRUZ? A: ADG904BRUZ is designed to act as a high-performance, low-voltage, bidirectional analog switch for various applications.

  3. Q: What voltage range does ADG904BRUZ support? A: ADG904BRUZ supports a wide voltage range from -5V to +5V, making it suitable for both single-supply and dual-supply systems.

  4. Q: Can ADG904BRUZ handle high-frequency signals? A: Yes, ADG904BRUZ has a bandwidth of up to 200 MHz, allowing it to handle high-frequency signals effectively.

  5. Q: How many channels does ADG904BRUZ have? A: ADG904BRUZ has four independent channels, which can be used to switch or route analog signals.

  6. Q: Is ADG904BRUZ compatible with digital control signals? A: Yes, ADG904BRUZ can be controlled using standard CMOS logic levels, making it easy to interface with microcontrollers or digital circuits.

  7. Q: What is the on-resistance of ADG904BRUZ? A: The typical on-resistance of ADG904BRUZ is around 4 ohms, ensuring minimal signal attenuation when the switch is closed.

  8. Q: Can ADG904BRUZ handle both AC and DC signals? A: Yes, ADG904BRUZ is suitable for both AC and DC signals, making it versatile for various applications.

  9. Q: Does ADG904BRUZ have any built-in protection features? A: Yes, ADG904BRUZ includes built-in ESD (Electrostatic Discharge) protection, guarding against potential damage during handling or operation.

  10. Q: What are some typical applications of ADG904BRUZ? A: ADG904BRUZ can be used in audio/video signal routing, communication systems, test equipment, medical devices, and other precision analog applications.

Please note that these answers are general and may vary depending on the specific requirements and use cases.