QD Devices Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
ADG713BRU
Lihat Detail Lembar Data

ADG713BRU

Product Overview

Category

ADG713BRU belongs to the category of analog switches.

Use

The ADG713BRU is used for signal routing and switching in various electronic circuits.

Characteristics

  • Low power consumption
  • High precision
  • Fast switching speed
  • Wide operating voltage range

Package

ADG713BRU is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of ADG713BRU lies in its ability to provide efficient signal routing and switching capabilities in electronic circuits.

Packaging/Quantity

ADG713BRU is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage Range: 2.7V to 12V
  • On-Resistance: 4Ω (typical)
  • Off-Leakage Current: 1nA (typical)
  • Bandwidth: 200MHz (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ADG713BRU has a total of 16 pins, which are configured as follows:

  1. VDD: Positive supply voltage
  2. GND: Ground reference
  3. IN1: Input control signal 1
  4. IN2: Input control signal 2
  5. IN3: Input control signal 3
  6. IN4: Input control signal 4
  7. COM: Common terminal
  8. NO1: Normally open terminal 1
  9. NC1: Normally closed terminal 1
  10. NO2: Normally open terminal 2
  11. NC2: Normally closed terminal 2
  12. NO3: Normally open terminal 3
  13. NC3: Normally closed terminal 3
  14. NO4: Normally open terminal 4
  15. NC4: Normally closed terminal 4
  16. VSS: Negative supply voltage

Functional Features

  • High precision signal routing and switching
  • Low power consumption for energy efficiency
  • Fast switching speed for real-time applications
  • Wide operating voltage range for compatibility with various systems

Advantages and Disadvantages

Advantages

  • Precise signal routing and switching capabilities
  • Low power consumption extends battery life in portable devices
  • Fast switching speed enables real-time applications
  • Wide operating voltage range ensures compatibility with different systems

Disadvantages

  • Limited number of input control signals (4 in total)
  • May require additional external components for certain applications

Working Principles

ADG713BRU operates based on the principle of solid-state switching. When the appropriate control signals are applied to the input pins, the internal switches connect or disconnect the corresponding terminals, allowing the desired signal routing or switching.

Detailed Application Field Plans

ADG713BRU finds applications in various fields, including:

  1. Audio systems: Signal routing and switching in audio mixers and amplifiers.
  2. Test and measurement equipment: Switching between different test points or instruments.
  3. Communication systems: Routing signals between different communication channels.
  4. Industrial automation: Controlling the flow of signals in automated systems.
  5. Medical devices: Switching between different sensors or monitoring devices.

Detailed and Complete Alternative Models

  1. ADG714BRU: Similar to ADG713BRU but with additional input control signals.
  2. ADG712BRU: Analog switch with lower on-resistance and higher bandwidth.
  3. ADG715BRU: Analog switch with extended temperature range for harsh environments.

(Note: This is a fictional entry and the mentioned alternative models may not exist in reality.)

Word Count: 510

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan ADG713BRU dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of ADG713BRU in technical solutions:

  1. Q: What is ADG713BRU? A: ADG713BRU is a multiplexer/demultiplexer IC (Integrated Circuit) that allows for the selection of one input from multiple inputs or the routing of one output to multiple outputs.

  2. Q: What is the operating voltage range of ADG713BRU? A: The operating voltage range of ADG713BRU is typically between 2.7V and 12V.

  3. Q: How many channels does ADG713BRU have? A: ADG713BRU has a total of four independent channels.

  4. Q: What is the maximum current handling capability of ADG713BRU? A: ADG713BRU can handle a maximum continuous current of up to 200mA per channel.

  5. Q: Can ADG713BRU be used for bidirectional signal routing? A: Yes, ADG713BRU supports bidirectional signal routing, allowing signals to flow in both directions.

  6. Q: What is the typical on-resistance of ADG713BRU? A: The typical on-resistance of ADG713BRU is around 50 ohms.

  7. Q: Does ADG713BRU have any built-in protection features? A: Yes, ADG713BRU includes built-in ESD (Electrostatic Discharge) protection on all pins.

  8. Q: Can ADG713BRU be used in high-frequency applications? A: Yes, ADG713BRU has a wide bandwidth and can be used in high-frequency applications up to several hundred megahertz.

  9. Q: What is the package type of ADG713BRU? A: ADG713BRU is available in a 16-lead TSSOP (Thin Shrink Small Outline Package).

  10. Q: Are there any evaluation boards or reference designs available for ADG713BRU? A: Yes, Analog Devices provides evaluation boards and reference designs that can help in understanding and implementing ADG713BRU in various applications.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.