Allegro MicroSystems, LLC
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
ATS635LSETN
Lihat Detail Lembar Data

ATS635LSETN Product Overview

Introduction

The ATS635LSETN is a versatile sensor designed for use in various applications. This entry provides an in-depth overview of the product, including its category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Category and Use

The ATS635LSETN belongs to the category of magnetic position sensors. It is commonly used for detecting the position of a magnetic target and converting it into an electrical signal. The sensor is widely utilized in automotive, industrial, and consumer electronics applications.

Characteristics

  • Sensing Technology: Hall Effect
  • Output Type: Digital
  • Operating Temperature: -40°C to 125°C
  • Supply Voltage: 3.0V to 24V
  • Package Type: Surface Mount
  • Essence: Accurate position sensing
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 3.0V to 24V
  • Output Current: 8mA
  • Operational Speed: Up to 20kHz
  • Output Logic: Active High/Low
  • Protection: Reverse Polarity and Overvoltage

Detailed Pin Configuration

The ATS635LSETN features a 3-pin configuration: 1. VCC (Supply Voltage) 2. GND (Ground) 3. OUT (Digital Output)

Functional Features

  • High Accuracy: Provides precise position detection.
  • Wide Operating Voltage Range: Compatible with various power supplies.
  • Fast Response Time: Capable of high-speed position sensing.
  • Robust Design: Resistant to environmental factors such as temperature and vibration.

Advantages and Disadvantages

Advantages

  • Reliable and accurate position sensing
  • Wide operating voltage range
  • Fast response time
  • Robust design for harsh environments

Disadvantages

  • Limited output current capacity
  • Sensitive to external magnetic fields

Working Principles

The ATS635LSETN operates based on the Hall Effect, where the presence of a magnetic field causes a voltage difference across the sensor. This voltage change is then converted into a digital output signal, indicating the position of the magnetic target relative to the sensor.

Detailed Application Field Plans

The ATS635LSETN is suitable for a wide range of applications, including: - Automotive: Throttle position sensing, gear shift position detection - Industrial: Conveyor belt speed control, rotary encoder position feedback - Consumer Electronics: Joystick position detection, robotics motion control

Detailed and Complete Alternative Models

  1. ATS663LSG
    • Similar Hall Effect sensor with enhanced temperature range
    • Suitable for high-temperature industrial applications
  2. ATS649LSHTN
    • Higher output current capacity for demanding industrial environments
    • Enhanced resistance to external magnetic interference

In conclusion, the ATS635LSETN offers reliable and accurate position sensing capabilities, making it a valuable component in various industries. Its robust design and wide operating voltage range make it suitable for diverse applications, despite its limitations in output current capacity and sensitivity to external magnetic fields.

Word Count: 498

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan ATS635LSETN dalam solusi teknis

  1. What is ATS635LSETN?

    • ATS635LSETN is a Hall-effect sensor designed for use in automotive and industrial applications to detect the position of a magnetic field.

  2. What are the key features of ATS635LSETN?

    • The key features include high sensitivity, wide operating voltage range, and robust design for harsh environments.

  3. How is ATS635LSETN typically used in automotive applications?

    • It is commonly used in throttle position sensors, gear shift position sensors, and brake pedal position sensors in automotive systems.

  4. In what industrial applications can ATS635LSETN be utilized?

    • It can be used in industrial automation for position sensing in actuators, valves, and other machinery.

  5. What is the operating temperature range of ATS635LSETN?

    • The sensor is designed to operate within a temperature range of -40°C to 150°C.

  6. What is the output signal format of ATS635LSETN?

    • The sensor provides a digital output signal, making it compatible with microcontrollers and digital interface circuits.

  7. Does ATS635LSETN require any external calibration or compensation?

    • No, the sensor is factory-programmed and does not require external calibration or compensation.

  8. Can ATS635LSETN withstand exposure to moisture and dust?

    • Yes, the sensor is designed with protection against moisture and dust ingress, making it suitable for rugged environments.

  9. What are the power supply requirements for ATS635LSETN?

    • The sensor operates from a single power supply voltage within the specified range, typically around 5V.

  10. Is there a recommended evaluation kit available for ATS635LSETN?

    • Yes, a dedicated evaluation kit is available to facilitate testing and integration of the sensor into technical solutions.