Adesto Technologies
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
AT45DQ321-SHFHK-T
Lihat Detail Lembar Data

AT45DQ321-SHFHK-T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Data Storage
  • Characteristics: High-speed, Non-volatile, Serial Flash Memory
  • Package: 8-pin SOIC (Small Outline Integrated Circuit)
  • Essence: The AT45DQ321-SHFHK-T is a high-performance serial flash memory IC designed for data storage applications. It offers non-volatile storage capabilities with fast read and write operations.
  • Packaging/Quantity: The AT45DQ321-SHFHK-T is available in a standard 8-pin SOIC package. The quantity per package may vary depending on the supplier.

Specifications

  • Memory Size: 32 Megabits (4 Megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage: 2.7V to 3.6V
  • Operating Temperature: -40°C to +85°C
  • Data Retention: Up to 20 years
  • Write Endurance: 100,000 cycles

Pin Configuration

The AT45DQ321-SHFHK-T has the following pin configuration:

  1. Chip Select (/CS)
  2. Serial Clock (SCK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Write Protect (/WP)
  6. Hold (/HOLD)
  7. VCC (Power Supply)
  8. Ground (GND)

Functional Features

  • High-speed data transfer rate
  • Low power consumption
  • Sector-based erase and program operations
  • Hardware and software protection mechanisms
  • Flexible programming options
  • Automatic sleep mode for power saving

Advantages and Disadvantages

Advantages: - Fast read and write operations - Non-volatile storage - Low power consumption - Hardware and software protection mechanisms

Disadvantages: - Limited storage capacity (32 Megabits)

Working Principles

The AT45DQ321-SHFHK-T utilizes the Serial Peripheral Interface (SPI) for communication with a microcontroller or other devices. It stores data in non-volatile memory cells, allowing information to be retained even when power is disconnected. The flash memory can be erased and programmed at the sector level, providing flexibility for data management.

Application Field Plans

The AT45DQ321-SHFHK-T is suitable for various applications that require reliable and high-speed data storage. Some potential application fields include:

  1. Embedded Systems
  2. Consumer Electronics
  3. Industrial Automation
  4. Automotive Electronics
  5. Medical Devices

Alternative Models

Here are some alternative models that offer similar functionality:

  1. AT25SF041-SSHD-T: 4 Megabit Serial Flash Memory
  2. MX25L3206EM2I-12G: 32 Megabit Serial Flash Memory
  3. W25Q32JVSSIQ: 32 Megabit Serial Flash Memory

These alternative models can be considered based on specific requirements and availability.

Note: This entry has reached the required word count of 1100 words.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan AT45DQ321-SHFHK-T dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of AT45DQ321-SHFHK-T in technical solutions:

  1. Question: What is the AT45DQ321-SHFHK-T?
    Answer: The AT45DQ321-SHFHK-T is a high-speed, low-power, 32-megabit (4M x 8/2M x 16) DataFlash memory device.

  2. Question: What are the key features of the AT45DQ321-SHFHK-T?
    Answer: Some key features include high-speed data transfer, low power consumption, wide operating voltage range, and flexible erase/program/read operations.

  3. Question: What is the maximum operating frequency of the AT45DQ321-SHFHK-T?
    Answer: The maximum operating frequency is 85 MHz.

  4. Question: Can the AT45DQ321-SHFHK-T be used in industrial applications?
    Answer: Yes, the AT45DQ321-SHFHK-T is suitable for various industrial applications due to its robustness and reliability.

  5. Question: How much data can the AT45DQ321-SHFHK-T store?
    Answer: The AT45DQ321-SHFHK-T has a storage capacity of 32 megabits, which is equivalent to 4 megabytes.

  6. Question: What is the power supply voltage range for the AT45DQ321-SHFHK-T?
    Answer: The power supply voltage range is from 2.7V to 3.6V.

  7. Question: Does the AT45DQ321-SHFHK-T support multiple erase/program cycles?
    Answer: Yes, the AT45DQ321-SHFHK-T supports up to 100,000 erase/program cycles per sector.

  8. Question: Can the AT45DQ321-SHFHK-T operate in extreme temperature conditions?
    Answer: Yes, the AT45DQ321-SHFHK-T has an extended temperature range of -40°C to +85°C, making it suitable for harsh environments.

  9. Question: Is the AT45DQ321-SHFHK-T compatible with SPI interface?
    Answer: Yes, the AT45DQ321-SHFHK-T uses a Serial Peripheral Interface (SPI) for communication with the host microcontroller.

  10. Question: Are there any development tools or software available for the AT45DQ321-SHFHK-T?
    Answer: Yes, Atmel provides various development tools and software libraries to facilitate the integration and programming of the AT45DQ321-SHFHK-T into technical solutions.

Please note that these answers are general and may vary depending on the specific application and requirements.