Lihat spesifikasi untuk detail produk.
S-8521F36MC-BPVT2G
Product Overview
Category
S-8521F36MC-BPVT2G belongs to the category of voltage regulators.
Use
This product is primarily used for regulating voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Wide input voltage range
- Thermal shutdown protection
- Overcurrent protection
Package
The S-8521F36MC-BPVT2G comes in a small surface-mount package, making it suitable for compact electronic devices.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage to ensure proper functioning of electronic circuits.
Packaging/Quantity
The S-8521F36MC-BPVT2G is typically packaged in reels containing a specific quantity of units, such as 3000 pieces per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.6V
- Dropout Voltage: 200mV (typical)
- Maximum Output Current: 150mA
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-8521F36MC-BPVT2G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin
- NC: No connection pin
Functional Features
- High Precision Regulation: The S-8521F36MC-BPVT2G provides precise voltage regulation, ensuring stable output even under varying load conditions.
- Low Dropout Voltage: With a low dropout voltage, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
- Wide Input Voltage Range: The product can accept a wide range of input voltages, making it versatile for various applications.
- Thermal Shutdown Protection: In case of excessive temperature, the regulator automatically shuts down to prevent damage.
- Overcurrent Protection: The S-8521F36MC-BPVT2G incorporates overcurrent protection to safeguard against excessive current flow.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures stable performance of electronic circuits.
- Low dropout voltage allows for efficient power conversion.
- Wide input voltage range provides flexibility in different applications.
- Thermal shutdown and overcurrent protection enhance reliability and safety.
Disadvantages
- Limited maximum output current may restrict usage in high-power applications.
- Requires careful consideration of heat dissipation due to small package size.
Working Principles
The S-8521F36MC-BPVT2G operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. This is achieved through a combination of voltage reference, error amplifier, and pass transistor.
Detailed Application Field Plans
The S-8521F36MC-BPVT2G finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices
Detailed and Complete Alternative Models
- S-8521F33MC-BPVT2G: Output voltage of 3.3V, otherwise similar specifications.
- S-8521F50MC-BPVT2G: Output voltage of 5.0V, otherwise similar specifications.
- S-8521F25MC-BPVT2G: Output voltage of 2.5V, otherwise similar specifications.
These alternative models provide different output voltage options while maintaining similar characteristics and functionality.
Word count: 455 words
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan S-8521F36MC-BPVT2G dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of S-8521F36MC-BPVT2G in technical solutions:
Q1: What is S-8521F36MC-BPVT2G? A1: S-8521F36MC-BPVT2G is a specific model of voltage detector IC (integrated circuit) manufactured by a company called Seiko Instruments. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.
Q2: What is the operating voltage range of S-8521F36MC-BPVT2G? A2: The operating voltage range of S-8521F36MC-BPVT2G is typically between 0.8V and 6.0V.
Q3: How does S-8521F36MC-BPVT2G work? A3: S-8521F36MC-BPVT2G works by comparing the input voltage with a reference voltage internally set within the IC. When the input voltage drops below the reference voltage, it triggers the output signal.
Q4: What is the output signal of S-8521F36MC-BPVT2G? A4: The output signal of S-8521F36MC-BPVT2G is an open-drain output that can be connected to other devices or circuits for further processing or triggering actions.
Q5: Can S-8521F36MC-BPVT2G be used in battery-powered applications? A5: Yes, S-8521F36MC-BPVT2G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.
Q6: Is S-8521F36MC-BPVT2G suitable for automotive applications? A6: Yes, S-8521F36MC-BPVT2G is suitable for automotive applications as it meets the AEC-Q100 automotive reliability standards.
Q7: Can S-8521F36MC-BPVT2G be used in industrial control systems? A7: Yes, S-8521F36MC-BPVT2G can be used in industrial control systems to monitor power supply voltages and trigger actions based on voltage thresholds.
Q8: Does S-8521F36MC-BPVT2G have built-in hysteresis? A8: Yes, S-8521F36MC-BPVT2G has built-in hysteresis, which helps prevent output oscillation near the threshold voltage.
Q9: What is the temperature range of operation for S-8521F36MC-BPVT2G? A9: The temperature range of operation for S-8521F36MC-BPVT2G is typically between -40°C and +85°C.
Q10: Can S-8521F36MC-BPVT2G be used in safety-critical applications? A10: Yes, S-8521F36MC-BPVT2G can be used in safety-critical applications as it has a high level of accuracy and reliability, meeting various industry standards.
Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.