ABLIC U.S.A. Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
S-8521B21MC-ATGT2U
Lihat Detail Lembar Data

S-8521B21MC-ATGT2U

Product Overview

Category

The S-8521B21MC-ATGT2U belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for power management and voltage regulation.

Characteristics

  • Package: The S-8521B21MC-ATGT2U comes in a small surface-mount package.
  • Essence: It is designed to provide efficient power management solutions.
  • Packaging/Quantity: Typically, this IC is supplied in reels or tubes, with a quantity of 2500 units per reel.

Specifications

The specifications of the S-8521B21MC-ATGT2U are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 300mA
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of the S-8521B21MC-ATGT2U is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin

Functional Features

The S-8521B21MC-ATGT2U offers the following functional features:

  • High efficiency power conversion
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - Efficient power management - Wide input and output voltage range - Compact package size - Multiple protection features

Disadvantages: - Limited maximum output current (300mA)

Working Principles

The S-8521B21MC-ATGT2U operates based on a switching regulator topology. It utilizes an internal control circuit to regulate the output voltage by adjusting the duty cycle of the internal power switch. This allows for efficient power conversion and voltage regulation.

Detailed Application Field Plans

The S-8521B21MC-ATGT2U is suitable for various applications, including but not limited to: - Portable electronic devices - Battery-powered devices - IoT (Internet of Things) devices - Wearable devices - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the S-8521B21MC-ATGT2U are: - S-8521B20MC-ATGT2U - S-8521B22MC-ATGT2U - S-8521B23MC-ATGT2U - S-8521B24MC-ATGT2U

These alternative models provide comparable power management solutions with slight variations in specifications and features.

In conclusion, the S-8521B21MC-ATGT2U is an integrated circuit designed for efficient power management and voltage regulation. With its compact package size and multiple protection features, it finds applications in various electronic devices. While it has a limited maximum output current, there are alternative models available to suit different requirements.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan S-8521B21MC-ATGT2U dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of S-8521B21MC-ATGT2U in technical solutions:

Q1: What is the S-8521B21MC-ATGT2U? A1: The S-8521B21MC-ATGT2U is a specific model of voltage detector IC (integrated circuit) manufactured by a company called Seiko Instruments. It is designed to monitor the voltage level in electronic circuits.

Q2: What is the typical operating voltage range of S-8521B21MC-ATGT2U? A2: The typical operating voltage range of S-8521B21MC-ATGT2U is from 0.8V to 6.0V.

Q3: How does S-8521B21MC-ATGT2U detect voltage levels? A3: S-8521B21MC-ATGT2U uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold. When the input voltage crosses this threshold, it triggers an output signal.

Q4: What is the purpose of using S-8521B21MC-ATGT2U in technical solutions? A4: S-8521B21MC-ATGT2U is commonly used as a voltage monitoring and detection component in various technical solutions. It helps ensure proper voltage levels, protect sensitive components, and trigger actions based on voltage thresholds.

Q5: Can S-8521B21MC-ATGT2U be used in battery-powered devices? A5: Yes, S-8521B21MC-ATGT2U can be used in battery-powered devices as it operates within a wide voltage range and consumes very low power.

Q6: Is S-8521B21MC-ATGT2U suitable for automotive applications? A6: Yes, S-8521B21MC-ATGT2U is suitable for automotive applications as it can withstand the harsh operating conditions typically found in automotive environments.

Q7: Can S-8521B21MC-ATGT2U be used to detect overvoltage conditions? A7: Yes, S-8521B21MC-ATGT2U can be configured to detect overvoltage conditions by setting the appropriate threshold voltage.

Q8: Is S-8521B21MC-ATGT2U compatible with microcontrollers or other digital devices? A8: Yes, S-8521B21MC-ATGT2U provides a digital output signal that can be easily interfaced with microcontrollers or other digital devices.

Q9: What is the accuracy of voltage detection provided by S-8521B21MC-ATGT2U? A9: The accuracy of voltage detection provided by S-8521B21MC-ATGT2U is typically within ±1.5%.

Q10: Are there any specific precautions to consider when using S-8521B21MC-ATGT2U? A10: It is important to follow the manufacturer's datasheet and guidelines for proper usage and handling of S-8521B21MC-ATGT2U. Additionally, ensure correct voltage levels, avoid excessive heat, and protect against electrostatic discharge (ESD) during installation and operation.

Please note that these answers are general and may vary depending on the specific application and requirements.