ABLIC U.S.A. Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
S-8520D31MC-BVQT2G
Lihat Detail Lembar Data

S-8520D31MC-BVQT2G

Product Overview

Category

S-8520D31MC-BVQT2G belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

The S-8520D31MC-BVQT2G comes in a small surface-mount package, which allows for easy integration into various electronic devices.

Essence

The essence of this product lies in its ability to regulate voltage and efficiently manage power supply within electronic devices.

Packaging/Quantity

The S-8520D31MC-BVQT2G is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 0.8V - 5.5V
  • Maximum Output Current: 3.1A
  • Operating Temperature Range: -40°C to +85°C
  • Efficiency: Up to 95%
  • Quiescent Current: 50µA (typical)

Detailed Pin Configuration

The S-8520D31MC-BVQT2G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin

Functional Features

  • Wide input voltage range for compatibility with various power sources
  • High output current capability for powering demanding electronic components
  • Built-in protection features such as overcurrent and thermal shutdown
  • Fast transient response for stable voltage regulation
  • Low dropout voltage for efficient power management

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Compact size allows for space-saving integration in electronic devices
  • Wide input voltage range provides flexibility in power source selection
  • Built-in protection features enhance device reliability

Disadvantages

  • May require additional external components for specific applications
  • Limited output current compared to some other ICs in the same category

Working Principles

The S-8520D31MC-BVQT2G operates based on a switching regulator principle. It uses an internal control circuit to monitor the input voltage and adjust the duty cycle of the internal switch to regulate the output voltage. This enables efficient power conversion and voltage regulation within the specified range.

Detailed Application Field Plans

The S-8520D31MC-BVQT2G finds application in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Digital cameras - Wireless communication devices

Detailed and Complete Alternative Models

  1. S-8520D30MC-BVQT2G
  2. S-8520D32MC-BVQT2G
  3. S-8520D33MC-BVQT2G
  4. S-8520D34MC-BVQT2G
  5. S-8520D35MC-BVQT2G

These alternative models offer similar voltage regulation and power management capabilities, with slight variations in specifications and package options.

In conclusion, the S-8520D31MC-BVQT2G is a versatile integrated circuit that excels in voltage regulation and power management. Its compact size, high efficiency, and wide input voltage range make it suitable for a variety of electronic devices. While it has certain limitations, its advantages outweigh the disadvantages, making it a reliable choice for power management applications.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan S-8520D31MC-BVQT2G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of S-8520D31MC-BVQT2G in technical solutions:

  1. Q: What is the S-8520D31MC-BVQT2G? A: The S-8520D31MC-BVQT2G is a voltage regulator IC (integrated circuit) that provides stable power supply voltage for various electronic devices.

  2. Q: What is the input voltage range of S-8520D31MC-BVQT2G? A: The input voltage range of S-8520D31MC-BVQT2G is typically between 2.5V and 6.0V.

  3. Q: What is the output voltage of S-8520D31MC-BVQT2G? A: The output voltage of S-8520D31MC-BVQT2G is fixed at 3.1V.

  4. Q: What is the maximum output current of S-8520D31MC-BVQT2G? A: The maximum output current of S-8520D31MC-BVQT2G is typically 150mA.

  5. Q: Can S-8520D31MC-BVQT2G be used in battery-powered applications? A: Yes, S-8520D31MC-BVQT2G can be used in battery-powered applications as it has a low quiescent current and operates efficiently with low input voltages.

  6. Q: Does S-8520D31MC-BVQT2G have built-in protection features? A: Yes, S-8520D31MC-BVQT2G includes built-in protection features such as overcurrent protection, thermal shutdown, and reverse current protection.

  7. Q: What is the operating temperature range of S-8520D31MC-BVQT2G? A: The operating temperature range of S-8520D31MC-BVQT2G is typically -40°C to +85°C.

  8. Q: Can S-8520D31MC-BVQT2G be used in automotive applications? A: Yes, S-8520D31MC-BVQT2G is suitable for automotive applications as it meets the AEC-Q100 automotive reliability standards.

  9. Q: Does S-8520D31MC-BVQT2G require any external components for operation? A: No, S-8520D31MC-BVQT2G does not require any external components for basic operation. However, additional capacitors may be needed for stability and noise reduction.

  10. Q: Is there a datasheet available for S-8520D31MC-BVQT2G? A: Yes, a datasheet providing detailed information about the electrical characteristics, pin configuration, and application circuit examples of S-8520D31MC-BVQT2G can be found on the manufacturer's website or by contacting the supplier.