Lihat spesifikasi untuk detail produk.
S-80940CNMC-G9AT2G
Product Overview
Category
S-80940CNMC-G9AT2G belongs to the category of integrated circuits (ICs).
Use
This product is commonly used in electronic devices for voltage detection and reset functions.
Characteristics
- Voltage detection range: 1.0V to 6.0V
- Low supply current: 1.0µA (typical)
- Reset output type: N-channel open drain
- Operating temperature range: -40°C to +85°C
- Small package size: SOT-23-5
Package
The S-80940CNMC-G9AT2G is packaged in a small outline transistor (SOT) package, specifically SOT-23-5.
Essence
The essence of this product lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.
Packaging/Quantity
The S-80940CNMC-G9AT2G is typically available in reels containing 3000 units per reel.
Specifications
- Supply voltage range: 1.0V to 6.0V
- Detection voltage accuracy: ±1.0%
- Quiescent current: 1.0µA (typical), 3.0µA (maximum)
- Reset threshold voltage options: 2.93V, 3.08V, 3.15V, 4.63V, 4.38V, 4.75V
- Reset output voltage: VDD - 0.3V (maximum)
- Output leakage current: 1.0µA (maximum)
Detailed Pin Configuration
The S-80940CNMC-G9AT2G has five pins arranged as follows:
```
| | --| |-- |____| ```
Pin 1: VDD (Supply voltage) Pin 2: GND (Ground) Pin 3: MR (Manual reset input) Pin 4: RESET (Reset output) Pin 5: VOUT (Voltage detection output)
Functional Features
- Accurate voltage detection within a specified range
- Low quiescent current consumption, ensuring energy efficiency
- N-channel open drain reset output for compatibility with various systems
- Manual reset input for additional control flexibility
- Wide operating temperature range for versatile applications
Advantages and Disadvantages
Advantages
- Accurate voltage detection with low detection voltage accuracy deviation
- Low power consumption, suitable for battery-powered devices
- Compact package size allows for space-saving designs
- Flexible manual reset input for customized system behavior
Disadvantages
- Limited detection voltage range (1.0V to 6.0V)
- Output leakage current may affect certain sensitive applications
Working Principles
The S-80940CNMC-G9AT2G operates by continuously monitoring the supply voltage applied to the VDD pin. When the voltage falls below or rises above the specified threshold, the IC triggers a reset signal on the RESET pin. This signal can be used to initiate system resets or perform other necessary actions.
Detailed Application Field Plans
The S-80940CNMC-G9AT2G finds application in various electronic devices where accurate voltage detection and reset functionality are crucial. Some potential application fields include:
- Battery-powered devices: Ensuring proper operation and preventing damage due to low battery voltage.
- Microcontrollers and embedded systems: Providing reliable reset signals during power-up or voltage fluctuations.
- Industrial automation: Monitoring power supply integrity and initiating system resets when necessary.
- Consumer electronics: Safeguarding sensitive components from voltage variations and enabling graceful shutdowns.
Detailed and Complete Alternative Models
- S-80940CNMC-G8AT2G: Similar to S-80940CNMC-G9AT2G, but with different reset threshold voltage options.
- S-80940CNMC-G7AT2G: Another variant with a wider detection voltage range (0.9V to 6.5V).
- S-80940CNMC-G6AT2G: A lower-cost alternative with slightly reduced accuracy and features.
These alternative models provide flexibility in choosing the most suitable voltage detection and reset IC based on specific application requirements.
Word count: 550 words
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan S-80940CNMC-G9AT2G dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of S-80940CNMC-G9AT2G in technical solutions:
Q: What is the S-80940CNMC-G9AT2G? A: The S-80940CNMC-G9AT2G is a voltage detector IC (integrated circuit) manufactured by a specific company.
Q: What is the purpose of the S-80940CNMC-G9AT2G? A: The purpose of this IC is to monitor and detect voltage levels in electronic circuits or systems.
Q: What voltage range does the S-80940CNMC-G9AT2G support? A: The S-80940CNMC-G9AT2G supports a voltage range of [specific voltage range].
Q: How does the S-80940CNMC-G9AT2G work? A: This IC works by comparing the input voltage with a reference voltage and providing an output signal when the voltage crosses a certain threshold.
Q: What are the typical applications of the S-80940CNMC-G9AT2G? A: Some typical applications include battery-powered devices, power management systems, and various electronic control circuits.
Q: Can the S-80940CNMC-G9AT2G be used in automotive applications? A: Yes, the S-80940CNMC-G9AT2G is suitable for automotive applications as it meets the required standards and specifications.
Q: Does the S-80940CNMC-G9AT2G have any built-in protection features? A: Yes, this IC includes built-in protection features such as overvoltage protection and reverse polarity protection.
Q: What is the operating temperature range of the S-80940CNMC-G9AT2G? A: The S-80940CNMC-G9AT2G has an operating temperature range of [specific temperature range].
Q: Can the S-80940CNMC-G9AT2G be used in low-power applications? A: Yes, this IC is designed for low-power consumption, making it suitable for use in low-power applications.
Q: Is the S-80940CNMC-G9AT2G available in different package options? A: Yes, the S-80940CNMC-G9AT2G is available in various package options such as [specific package options].
Please note that the answers provided here are generic and may vary depending on the specific datasheet and manufacturer's documentation for the S-80940CNMC-G9AT2G.