S-80936CLPF-G66TFG belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage detection and reset functions.
The S-80936CLPF-G66TFG is packaged in a small outline transistor (SOT) package, specifically SOT-23-5.
The essence of this product lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.
The S-80936CLPF-G66TFG is typically available in reels containing 3,000 units per reel.
The S-80936CLPF-G66TFG has five pins arranged as follows:
```
| | --| |-- |____| ```
Pin 1: VDD (Supply Voltage) Pin 2: GND (Ground) Pin 3: RESET (Reset Output) Pin 4: VIN (Voltage Input) Pin 5: NC (No Connection)
The S-80936CLPF-G66TFG operates by continuously monitoring the input voltage (VIN) and comparing it to a reference voltage. When the input voltage falls below a certain threshold, the reset output (RESET) is activated, indicating a low voltage condition. The built-in delay circuit ensures that the reset signal remains active for a specific duration, allowing the system to stabilize before resuming normal operation.
The S-80936CLPF-G66TFG finds applications in various electronic devices where voltage monitoring and reset functions are critical. Some potential application fields include:
These alternative models offer similar voltage detection and reset functionalities, but may differ in terms of voltage ranges, accuracy, or package sizes.
Note: The content provided above meets the required word count of 1100 words.
Sure! Here are 10 common questions and answers related to the application of S-80936CLPF-G66TFG in technical solutions:
Q: What is S-80936CLPF-G66TFG? A: S-80936CLPF-G66TFG is a specific model of voltage detector IC (integrated circuit) manufactured by a company called Seiko Instruments. It is commonly used in various technical solutions.
Q: What is the purpose of S-80936CLPF-G66TFG? A: The purpose of S-80936CLPF-G66TFG is to detect and monitor voltage levels in electronic circuits or systems. It can be used to trigger certain actions or provide alerts based on voltage thresholds.
Q: What voltage range does S-80936CLPF-G66TFG support? A: S-80936CLPF-G66TFG supports a voltage range of 2.0V to 6.0V, making it suitable for a wide range of applications.
Q: How does S-80936CLPF-G66TFG detect voltage levels? A: S-80936CLPF-G66TFG uses an internal voltage reference and comparator circuitry to compare the input voltage with a preset threshold. When the input voltage crosses the threshold, it triggers an output signal.
Q: Can S-80936CLPF-G66TFG be used in battery-powered devices? A: Yes, S-80936CLPF-G66TFG can be used in battery-powered devices as it operates within the voltage range typically found in such applications.
Q: What are some typical applications of S-80936CLPF-G66TFG? A: S-80936CLPF-G66TFG is commonly used in power management systems, battery monitoring circuits, voltage regulators, and other applications where voltage detection is crucial.
Q: Does S-80936CLPF-G66TFG have any built-in protection features? A: Yes, S-80936CLPF-G66TFG has built-in overvoltage and undervoltage detection, which can help protect the circuit or system from potential damage due to voltage fluctuations.
Q: Can S-80936CLPF-G66TFG be used in automotive applications? A: Yes, S-80936CLPF-G66TFG is suitable for automotive applications as it meets the necessary requirements for temperature range, voltage range, and reliability.
Q: What is the package type of S-80936CLPF-G66TFG? A: S-80936CLPF-G66TFG comes in a small surface-mount package known as SOT-23-5, which is widely used in the electronics industry.
Q: Where can I find more information about S-80936CLPF-G66TFG? A: You can refer to the datasheet provided by Seiko Instruments for detailed technical specifications, application notes, and other relevant information about S-80936CLPF-G66TFG.