Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
S-80922CLPF-G6STFG

S-80922CLPF-G6STFG

Product Overview

Category

S-80922CLPF-G6STFG belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

  • Voltage detection range: 1.2V to 6.0V
  • Accuracy: ±1.0%
  • Low supply current: 1.0μA (typ.)
  • Reset output type: N-channel open drain
  • Operating temperature range: -40°C to +85°C

Package

S-80922CLPF-G6STFG is available in a small surface-mount package, specifically the SOT-23-5 package.

Essence

The essence of this product lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.

Packaging/Quantity

This product is typically packaged in reels, with 3,000 units per reel.

Specifications

  • Supply voltage range: 1.2V to 6.0V
  • Quiescent current: 1.0μA (typ.)
  • Output voltage: VOUT = VDET - VRST
  • Reset threshold voltage accuracy: ±1.0%
  • Output type: N-channel open drain
  • Power-on reset delay time: 200ms (typ.)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The S-80922CLPF-G6STFG IC has the following pin configuration:

  1. VDD: Supply voltage input
  2. GND: Ground reference
  3. VOUT: Output voltage
  4. MR: Manual reset input
  5. VDET: Voltage detection input

Functional Features

  1. Voltage Detection: The S-80922CLPF-G6STFG can accurately detect voltage levels within the specified range.
  2. Reset Function: It provides a reset signal through the open-drain output when the voltage falls below the threshold.
  3. Low Power Consumption: With a quiescent current of only 1.0μA, this IC minimizes power consumption in electronic devices.

Advantages and Disadvantages

Advantages

  • Wide voltage detection range
  • High accuracy in voltage threshold detection
  • Low power consumption
  • Small package size for space-constrained applications

Disadvantages

  • Limited to N-channel open drain output type
  • Manual reset input may require additional external components for functionality

Working Principles

The S-80922CLPF-G6STFG operates by continuously monitoring the voltage level at the VDET pin. When the voltage falls below the preset threshold, the IC triggers a reset signal through the open-drain output pin (VOUT). This reset signal can be used to initiate system resets or other necessary actions.

Detailed Application Field Plans

The S-80922CLPF-G6STFG is widely used in various electronic devices that require voltage monitoring and reset functions. Some common application fields include:

  1. Microcontrollers: Ensuring proper system initialization and preventing data corruption during power fluctuations.
  2. Battery-Powered Devices: Monitoring battery voltage levels and triggering low-battery warnings or shutdowns.
  3. Industrial Control Systems: Providing reliable reset signals for critical control circuits.
  4. Automotive Electronics: Detecting abnormal voltage conditions and initiating appropriate actions.

Detailed and Complete Alternative Models

  1. S-80922CNPF-G6STFG: Similar to S-80922CLPF-G6STFG but with an active-high reset output.
  2. S-80922CLMC-G6STFG: Offers a wider operating temperature range (-40°C to +125°C) for extreme environments.
  3. S-80922CLPF-G7STFG: Provides a higher accuracy of ±0.5% in voltage threshold detection.

These alternative models offer similar functionality to the S-80922CLPF-G6STFG but may have slight variations in specifications or features to cater to different application requirements.

Word count: 530 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan S-80922CLPF-G6STFG dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of S-80922CLPF-G6STFG in technical solutions:

  1. Question: What is the operating voltage range for S-80922CLPF-G6STFG?
    Answer: The operating voltage range for S-80922CLPF-G6STFG is 2.0V to 6.5V.

  2. Question: What is the typical quiescent current consumption of S-80922CLPF-G6STFG?
    Answer: The typical quiescent current consumption of S-80922CLPF-G6STFG is 1.0µA.

  3. Question: Can S-80922CLPF-G6STFG be used as a reset IC in microcontroller-based systems?
    Answer: Yes, S-80922CLPF-G6STFG can be used as a reset IC in microcontroller-based systems.

  4. Question: What is the output voltage threshold of S-80922CLPF-G6STFG?
    Answer: The output voltage threshold of S-80922CLPF-G6STFG is typically 2.32V.

  5. Question: Is S-80922CLPF-G6STFG suitable for battery-powered applications?
    Answer: Yes, S-80922CLPF-G6STFG is suitable for battery-powered applications due to its low quiescent current consumption.

  6. Question: Can S-80922CLPF-G6STFG be used in automotive electronics?
    Answer: Yes, S-80922CLPF-G6STFG is AEC-Q100 qualified and can be used in automotive electronics.

  7. Question: Does S-80922CLPF-G6STFG have built-in hysteresis?
    Answer: Yes, S-80922CLPF-G6STFG has built-in hysteresis to prevent output oscillation near the threshold voltage.

  8. Question: What is the maximum supply voltage that S-80922CLPF-G6STFG can handle?
    Answer: The maximum supply voltage that S-80922CLPF-G6STFG can handle is 7.0V.

  9. Question: Can S-80922CLPF-G6STFG be used in industrial control systems?
    Answer: Yes, S-80922CLPF-G6STFG can be used in industrial control systems due to its wide operating temperature range (-40°C to +85°C).

  10. Question: Does S-80922CLPF-G6STFG have a manual reset input?
    Answer: No, S-80922CLPF-G6STFG does not have a manual reset input. It operates solely based on the monitored voltage level.

Please note that these answers are general and may vary depending on the specific application requirements.