S-80862CNPF-B9TTFU belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for voltage detection and reset functions.
The S-80862CNPF-B9TTFU is packaged in a SOT-23-5 package. It is available in tape and reel packaging, with a quantity of 3000 units per reel.
The S-80862CNPF-B9TTFU has a total of 5 pins arranged as follows:
The S-80862CNPF-B9TTFU operates by monitoring the input voltage (VIN) and comparing it to the preset detection voltage. When the input voltage falls below the detection voltage, the reset output (RESET) is activated, indicating a low voltage condition. This can be used to trigger a reset or shutdown sequence in the connected electronic device.
The S-80862CNPF-B9TTFU finds application in various electronic devices where voltage detection and reset functions are required. Some potential application fields include:
These alternative models offer similar functionality and characteristics, providing options for different voltage detection thresholds or package types.
Note: The above information is based on the available documentation and specifications provided by the manufacturer. Users are advised to refer to the official datasheet for the most accurate and up-to-date information.
Word count: 530 words
Sure! Here are 10 common questions and answers related to the application of S-80862CNPF-B9TTFU in technical solutions:
1. What is S-80862CNPF-B9TTFU? - S-80862CNPF-B9TTFU is a specific model of voltage detector IC (integrated circuit) manufactured by a company called "Sanken Electric." It is commonly used in technical solutions for voltage monitoring and detection.
2. What is the operating voltage range of S-80862CNPF-B9TTFU? - The operating voltage range of S-80862CNPF-B9TTFU is typically between 1.6V and 6.0V.
3. How does S-80862CNPF-B9TTFU detect voltage levels? - S-80862CNPF-B9TTFU detects voltage levels by comparing the input voltage with a reference voltage internally set within the IC. When the input voltage exceeds the reference voltage, it triggers an output signal.
4. What is the output configuration of S-80862CNPF-B9TTFU? - S-80862CNPF-B9TTFU has an open-drain output configuration, which means that it can either pull the output low or leave it floating.
5. What is the typical quiescent current consumption of S-80862CNPF-B9TTFU? - The typical quiescent current consumption of S-80862CNPF-B9TTFU is around 1.0µA.
6. Can S-80862CNPF-B9TTFU be used in battery-powered applications? - Yes, S-80862CNPF-B9TTFU is suitable for battery-powered applications due to its low quiescent current consumption, which helps in conserving battery life.
7. What is the maximum voltage that S-80862CNPF-B9TTFU can handle? - The maximum voltage that S-80862CNPF-B9TTFU can handle is typically 6.5V.
8. Does S-80862CNPF-B9TTFU have any built-in hysteresis? - Yes, S-80862CNPF-B9TTFU has a built-in hysteresis of approximately 0.1V, which helps prevent oscillation and false triggering near the threshold voltage.
9. Can S-80862CNPF-B9TTFU be used for overvoltage protection? - Yes, S-80862CNPF-B9TTFU can be used for overvoltage protection by setting the reference voltage to the desired threshold level.
10. Are there any specific application notes or reference designs available for S-80862CNPF-B9TTFU? - Yes, Sanken Electric provides application notes and reference designs for S-80862CNPF-B9TTFU, which can be found on their official website or obtained from their technical support team.
Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of S-80862CNPF-B9TTFU.