S-80853CNNB-B9ET2G

Product Overview

Category

S-80853CNNB-B9ET2G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used as a voltage detector in various electronic devices.

Characteristics

• Voltage detection range: 1.8V to 6.0V
• Low supply current: 1.0µA (typical)
• High accuracy: ±1.0%
• Built-in delay circuit
• Small package size: SOT-23-5

Package

The S-80853CNNB-B9ET2G is packaged in a SOT-23-5 package, which is a small surface-mount package with five pins.

Essence

The essence of this product lies in its ability to accurately detect voltage levels within a specified range and provide a reliable output signal.

Packaging/Quantity

The S-80853CNNB-B9ET2G is typically available in reels containing 3,000 units per reel.

Specifications

• Supply Voltage Range: 1.8V to 6.0V
• Output Voltage: Low (L) or High (H)
• Operating Temperature Range: -40°C to +85°C
• Quiescent Current: 1.0µA (typical)
• Accuracy: ±1.0%

Detailed Pin Configuration

The S-80853CNNB-B9ET2G has the following pin configuration:

```

---

| | --| VDD|-- Pin 1: Supply Voltage --| VIN|-- Pin 2: Voltage Input --| GND|-- Pin 3: Ground --| VOUT|-- Pin 4: Voltage Output --| EN |-- Pin 5: Enable |____| ```

Functional Features

• Voltage detection: The S-80853CNNB-B9ET2G can accurately detect voltage levels within the specified range.
• Output signal: It provides a reliable output signal (low or high) based on the detected voltage level.
• Built-in delay circuit: This product includes a delay circuit to prevent false triggering caused by voltage fluctuations.

Advantages and Disadvantages

Advantages

• Wide voltage detection range allows for versatile applications.
• Low supply current minimizes power consumption.
• High accuracy ensures precise voltage detection.
• Small package size enables space-saving designs.

Disadvantages

• Limited to voltage detection applications.
• Not suitable for high-voltage environments.

Working Principles

The S-80853CNNB-B9ET2G operates based on a voltage comparison principle. It compares the input voltage (VIN) with a reference voltage internally generated. If the input voltage exceeds the reference voltage, the output (VOUT) is set to a high state; otherwise, it remains low. The enable pin (EN) controls the operation of the voltage detector.

Detailed Application Field Plans

The S-80853CNNB-B9ET2G finds applications in various electronic devices that require accurate voltage detection. Some potential application fields include:

1. Battery-powered devices: Used to monitor battery voltage and trigger actions when it falls below a certain threshold.
2. Power management systems: Employed to control power supply switching based on voltage levels.
3. Industrial automation: Integrated into control circuits to ensure proper voltage levels for equipment operation.
4. Automotive electronics: Utilized for monitoring vehicle battery voltage and triggering warning signals if it drops too low.

Detailed and Complete Alternative Models

1. S-80850CNNB-B9JT2G: Similar voltage detector IC with a wider operating temperature range (-40°C to +105°C).
2. S-80852CNNB-B9KT2G: Voltage detector IC with a lower supply current (0.5µA typical) for ultra-low power applications.
3. S-80854CNNB-B9FT2G: Higher accuracy voltage detector IC with ±0.5% accuracy for more precise voltage monitoring.

These alternative models offer similar functionality to the S-80853CNNB-B9ET2G but may have different specifications or features that cater to specific application requirements.

Word count: 529 words