S-80838CLMC-B6XT2G

Product Overview

Category

S-80838CLMC-B6XT2G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

• Voltage detection range: 0.8V to 6.0V
• Accuracy: ±1.5%
• Low supply current: 1.0μA (typical)
• Small package size: SOT-23-5
• Built-in delay circuit: 200ms (typical)

Package and Quantity

The S-80838CLMC-B6XT2G is packaged in a SOT-23-5 package. Each package contains one unit of the product.

Essence

The essence of S-80838CLMC-B6XT2G lies in its ability to accurately detect voltage levels within a specified range and provide a reset signal when necessary.

Specifications

• Supply voltage range: 1.6V to 6.0V
• Operating temperature range: -40°C to +85°C
• Output type: Active low
• Quiescent current: 1.0μA (typical)
• Reset threshold voltage options: 2.3V, 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 3.6V, 3.7V, 3.8V, 3.9V, 4.0V, 4.1V, 4.2V, 4.3V, 4.4V, 4.5V, 4.6V, 4.7V, 4.8V, 4.9V, 5.0V, 5.1V, 5.2V, 5.3V, 5.4V, 5.5V, 5.6V, 5.7V, 5.8V, 5.9V

Detailed Pin Configuration

The S-80838CLMC-B6XT2G has a total of five pins:

1. VDD: Supply voltage input
2. GND: Ground reference
3. RESET: Active low reset output
4. MR: Manual reset input (optional)
5. VOUT: Voltage detection output

Functional Features

Voltage Detection

S-80838CLMC-B6XT2G is capable of accurately detecting the voltage level applied to its input pin within the specified range.

Reset Function

When the detected voltage falls below the threshold set by the user, the product generates an active low reset signal on the RESET pin.

Manual Reset (MR) Input

The MR pin allows for manual resetting of the device when pulled low. This feature is optional and can be left unconnected if not required.

Advantages and Disadvantages

Advantages

• Wide voltage detection range
• High accuracy
• Low supply current consumption
• Small package size for space-constrained applications
• Built-in delay circuit prevents false resets

Disadvantages

• Limited number of available reset threshold voltage options

Working Principles

The S-80838CLMC-B6XT2G operates by comparing the voltage at the VDD pin with the internally set threshold voltage. When the voltage drops below the threshold, the reset signal is activated. The built-in delay circuit ensures that momentary voltage fluctuations do not trigger false resets.

Detailed Application Field Plans

The S-80838CLMC-B6XT2G finds applications in various electronic devices where accurate voltage detection and reset functions are required. Some potential application fields include:

1. Microcontrollers and microprocessors
2. Power management systems
3. Battery-powered devices
4. Industrial automation equipment
5. Consumer electronics

Detailed and Complete Alternative Models

1. S-80838CLMC-B6XT1G: Similar to S-80838CLMC-B6XT2G, but with a different reset threshold voltage range.
2. S-80838CLMC-B6XT3G: Another variant with additional features such as adjustable delay time.
3. S-80838CLMC-B6XT4G: Higher accuracy version with tighter voltage detection tolerance.

These alternative models provide flexibility in choosing the most suitable product based on specific requirements.

In conclusion, the S-80838CLMC-B6XT2G is an integrated circuit designed for voltage detection and reset functions. With its wide voltage detection range, high accuracy, and low power consumption