S-80834CLNB-B6TT2G

Product Overview

Use

This product is commonly used in electronic devices for voltage detection and reset functions.

Characteristics

Voltage detection range: 1.8V to 5.0V
Low supply current: 0.7μA (typical)
Small package size: SOT-23-5
Built-in delay circuit for stable reset operation
Wide operating temperature range: -40°C to +85°C

Package and Quantity

The S-80834CLNB-B6TT2G is available in a SOT-23-5 package. It is typically sold in reels containing 3000 units.

Specifications

Supply voltage range: 1.8V to 5.5V
Reset threshold voltage options: 2.3V, 2.5V, 2.6V, 2.8V, 3.0V, 3.1V, 3.3V, 4.0V, 4.6V
Accuracy of ±1.5% (at 25°C)
Output type: active low
Quiescent current: 0.7μA (typical), 1.0μA (maximum)

Detailed Pin Configuration

The S-80834CLNB-B6TT2G has five pins arranged as follows:

```

| | --| |-- |____| | | |__| ```

Pin 1: VDD (Supply voltage) Pin 2: GND (Ground) Pin 3: MR (Manual reset input) Pin 4: RESET (Reset output) Pin 5: VOUT (Voltage detection output)

Functional Features

Voltage detection: The S-80834CLNB-B6TT2G can accurately detect the voltage level within the specified range.
Reset function: It provides a stable reset signal when the detected voltage falls below the threshold.
Manual reset: The MR pin allows for manual reset control.

Advantages

Low supply current ensures minimal power consumption.
Small package size enables space-saving designs.
Wide operating temperature range makes it suitable for various environments.
Accurate voltage detection and stable reset operation enhance system reliability.

Disadvantages

Limited options for reset threshold voltage may not meet specific application requirements.
Active low output may require additional circuitry for certain applications.

Working Principles

The S-80834CLNB-B6TT2G operates by continuously monitoring the input voltage. When the voltage drops below the set threshold, the reset output is activated, providing a reliable reset signal to the connected device. The built-in delay circuit ensures stable operation during power-up or voltage fluctuations.

Detailed Application Field Plans

The S-80834CLNB-B6TT2G finds applications in various electronic devices where voltage detection and reset functions are required. Some potential fields of application include: 1. Microcontrollers and microprocessors 2. Power management systems 3. Battery-powered devices 4. Industrial automation equipment 5. Consumer electronics

Detailed and Complete Alternative Models

S-80834CLNB-B6T1G
S-80834CLNB-B6T2G
S-80834CLNB-B6T3G
S-80834CLNB-B6T4G
S-80834CLNB-B6T5G

These alternative models offer similar functionality and characteristics, but with different reset threshold voltage options.

Word count: 410 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan S-80834CLNB-B6TT2G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of S-80834CLNB-B6TT2G in technical solutions:

Q: What is the purpose of S-80834CLNB-B6TT2G in technical solutions? A: S-80834CLNB-B6TT2G is a voltage detector IC that provides accurate monitoring and detection of voltage levels in various technical applications.
Q: What is the operating voltage range of S-80834CLNB-B6TT2G? A: The operating voltage range of S-80834CLNB-B6TT2G is typically between 1.6V and 6.0V.
Q: How does S-80834CLNB-B6TT2G detect voltage levels? A: S-80834CLNB-B6TT2G uses an internal voltage reference and a comparator to detect when the input voltage exceeds a certain threshold.
Q: Can S-80834CLNB-B6TT2G be used in battery-powered devices? A: Yes, S-80834CLNB-B6TT2G is suitable for battery-powered devices as it has low power consumption and can operate at low voltages.
Q: What is the output configuration of S-80834CLNB-B6TT2G? A: S-80834CLNB-B6TT2G has an open-drain output configuration, which allows for easy integration with other components.
Q: Is S-80834CLNB-B6TT2G capable of providing overvoltage protection? A: No, S-80834CLNB-B6TT2G is a voltage detector and does not provide overvoltage protection. It only detects voltage levels.
Q: Can S-80834CLNB-B6TT2G be used in automotive applications? A: Yes, S-80834CLNB-B6TT2G is suitable for automotive applications as it can operate within the required voltage range and temperature range.
Q: What is the typical response time of S-80834CLNB-B6TT2G? A: The typical response time of S-80834CLNB-B6TT2G is around 300 microseconds.
Q: Does S-80834CLNB-B6TT2G have any built-in hysteresis? A: Yes, S-80834CLNB-B6TT2G has a built-in hysteresis of approximately 100mV, which helps to prevent false triggering.
Q: Can S-80834CLNB-B6TT2G be used in industrial control systems? A: Yes, S-80834CLNB-B6TT2G is suitable for industrial control systems as it provides reliable voltage monitoring and detection capabilities.

Please note that these answers are general and may vary depending on the specific application and requirements.