S-80828CNMC-B8NT2G belongs to the category of voltage detectors.
This product is primarily used for detecting and monitoring voltage levels in electronic circuits.
The S-80828CNMC-B8NT2G comes in a small surface-mount package, making it suitable for integration into various electronic devices.
The essence of this product lies in its ability to accurately detect voltage levels and provide reliable monitoring in electronic circuits.
The S-80828CNMC-B8NT2G is typically packaged in reels, with each reel containing a specified quantity of units. The exact packaging and quantity may vary depending on the supplier.
The S-80828CNMC-B8NT2G has the following pin configuration:
The S-80828CNMC-B8NT2G operates based on a voltage divider network connected to an internal comparator. When the input voltage exceeds the detection threshold, the output pin is pulled low, indicating a detected voltage level.
The S-80828CNMC-B8NT2G finds applications in various fields, including but not limited to: 1. Battery-powered devices: Voltage monitoring in portable electronics, such as smartphones, tablets, and wearables. 2. Power management systems: Overvoltage/undervoltage protection circuits in power supplies and battery chargers. 3. Automotive electronics: Voltage monitoring in automotive systems, ensuring stable operation and preventing damage due to voltage fluctuations.
These alternative models offer similar functionality with slight variations in operating parameters to cater to different application requirements.
Word count: 515 words
Sure! Here are 10 common questions and answers related to the application of S-80828CNMC-B8NT2G in technical solutions:
1. What is the operating voltage range of S-80828CNMC-B8NT2G? - The operating voltage range of S-80828CNMC-B8NT2G is typically from 0.9V to 10V.
2. What is the maximum output current of S-80828CNMC-B8NT2G? - The maximum output current of S-80828CNMC-B8NT2G is 100mA.
3. Can S-80828CNMC-B8NT2G be used as a voltage regulator for microcontrollers? - Yes, S-80828CNMC-B8NT2G can be used as a voltage regulator for microcontrollers as it provides stable voltage output.
4. Does S-80828CNMC-B8NT2G have built-in overcurrent protection? - No, S-80828CNMC-B8NT2G does not have built-in overcurrent protection. External protection circuitry may be required.
5. What is the typical dropout voltage of S-80828CNMC-B8NT2G? - The typical dropout voltage of S-80828CNMC-B8NT2G is 0.15V at 100mA load.
6. Is S-80828CNMC-B8NT2G suitable for battery-powered applications? - Yes, S-80828CNMC-B8NT2G is suitable for battery-powered applications due to its low quiescent current and wide operating voltage range.
7. Can S-80828CNMC-B8NT2G handle input voltage spikes or transients? - S-80828CNMC-B8NT2G has a built-in overvoltage protection circuit that can handle input voltage spikes up to 16V.
8. What is the temperature range in which S-80828CNMC-B8NT2G can operate? - S-80828CNMC-B8NT2G can operate within a temperature range of -40°C to +85°C.
9. Does S-80828CNMC-B8NT2G require any external components for operation? - Yes, S-80828CNMC-B8NT2G requires an input and output capacitor for stable operation. Refer to the datasheet for recommended values.
10. Can S-80828CNMC-B8NT2G be used in automotive applications? - Yes, S-80828CNMC-B8NT2G is AEC-Q100 qualified and can be used in automotive applications where reliable voltage regulation is required.
Please note that these answers are based on general information about S-80828CNMC-B8NT2G. It is always recommended to refer to the datasheet and consult with the manufacturer for specific application requirements.