Lihat spesifikasi untuk detail produk.
S-5712ACDH1-M3T1U
Product Overview
Category
The S-5712ACDH1-M3T1U belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize voltage in electronic circuits and devices.
Characteristics
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 0.8V to 5.0V
- Low Dropout Voltage: 160mV @ 300mA
- High Ripple Rejection: 75dB @ 1kHz
- Current Limit Circuit
- Thermal Shutdown Circuit
- Short Circuit Protection Circuit
Package
The S-5712ACDH1-M3T1U comes in a small, surface-mount package for easy integration into circuit boards.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic applications.
Packaging/Quantity
The product is typically packaged in reels and available in quantities suitable for production runs.
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 0.8V to 5.0V
- Maximum Output Current: 500mA
- Dropout Voltage: 160mV @ 300mA
- Operating Temperature Range: -40°C to 85°C
- Package: SOT-23-5
Detailed Pin Configuration
The S-5712ACDH1-M3T1U has a standard SOT-23-5 pin configuration with the following pinout: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. VOUT (Output Voltage) 5. EN (Enable)
Functional Features
- Wide Input Voltage Range
- Low Dropout Voltage
- High Ripple Rejection
- Current Limit Circuit
- Thermal Shutdown Circuit
- Short Circuit Protection Circuit
Advantages and Disadvantages
Advantages
- Wide input voltage range allows for versatile applications
- Low dropout voltage ensures efficient power conversion
- Integrated protection circuits enhance reliability and safety
Disadvantages
- Limited maximum output current compared to some competing models
- May require additional components for specific application requirements
Working Principles
The S-5712ACDH1-M3T1U operates by regulating the input voltage to provide a stable and precise output voltage, even under varying load conditions. It utilizes internal control circuits to ensure proper operation and protection against fault conditions.
Detailed Application Field Plans
This voltage regulator is well-suited for various applications, including: - Battery-powered devices - Portable electronics - IoT devices - Wearable technology - Embedded systems
Detailed and Complete Alternative Models
Some alternative models to consider include: - S-5712BCDH1-M3T1U - S-5712ADH1-M3T1U - S-5712ACH1-M3T1U - S-5712CCDH1-M3T1U
In conclusion, the S-5712ACDH1-M3T1U voltage regulator offers a reliable and efficient solution for stabilizing voltage in a wide range of electronic applications. Its compact size, integrated protection features, and wide input voltage range make it a versatile choice for designers seeking a dependable voltage regulation solution.
[Word Count: 443]
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan S-5712ACDH1-M3T1U dalam solusi teknis
What is S-5712ACDH1-M3T1U?
- S-5712ACDH1-M3T1U is a high-performance, low-power voltage detector IC designed for technical solutions requiring reliable voltage monitoring.
What is the operating voltage range of S-5712ACDH1-M3T1U?
- The operating voltage range of S-5712ACDH1-M3T1U is 0.7V to 6.0V.
What are the typical applications of S-5712ACDH1-M3T1U?
- Typical applications include power management in portable devices, battery-powered systems, and industrial equipment where precise voltage monitoring is critical.
What is the quiescent current consumption of S-5712ACDH1-M3T1U?
- The quiescent current consumption is typically 0.8μA, making it suitable for low-power applications.
Does S-5712ACDH1-M3T1U have built-in hysteresis?
- Yes, it has built-in hysteresis to prevent output oscillation near the threshold voltage.
What is the output configuration of S-5712ACDH1-M3T1U?
- It features an open-drain output, allowing flexibility in interfacing with various microcontrollers and logic circuits.
Can S-5712ACDH1-M3T1U withstand voltage transients?
- Yes, it is designed to withstand voltage transients and noise, enhancing its reliability in harsh environments.
Is S-5712ACDH1-M3T1U available in different package options?
- Yes, it is available in various package options, including SOT-23-5 and USP-6C.
What is the temperature range for S-5712ACDH1-M3T1U?
- It operates over a wide temperature range from -40°C to 85°C, making it suitable for diverse environmental conditions.
Are there any evaluation boards or reference designs available for S-5712ACDH1-M3T1U?
- Yes, evaluation boards and reference designs are available to facilitate easy integration and testing in technical solutions.