Lihat spesifikasi untuk detail produk.
S-1009C17I-M5T1U
Product Overview
Category
S-1009C17I-M5T1U belongs to the category of voltage regulators.
Use
This product is used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low dropout voltage
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
The S-1009C17I-M5T1U comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.
Packaging/Quantity
The S-1009C17I-M5T1U is typically packaged in reels and is available in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.0V - 6.0V
- Output Voltage: 1.7V
- Output Current: 100mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1009C17I-M5T1U has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: The S-1009C17I-M5T1U ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: The device automatically shuts down when the output current exceeds the specified limit, protecting the circuit from damage.
- Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent overheating.
Advantages and Disadvantages
Advantages
- Small size allows for easy integration into compact electronic devices.
- High efficiency results in minimal power loss during voltage regulation.
- Wide input voltage range provides flexibility in various applications.
- Overcurrent and thermal shutdown protection enhance the reliability of the circuit.
Disadvantages
- Limited output current capacity may not be suitable for high-power applications.
- Dropout voltage may cause a slight decrease in the output voltage under certain conditions.
Working Principles
The S-1009C17I-M5T1U operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for changes in the input voltage and load conditions.
Detailed Application Field Plans
The S-1009C17I-M5T1U finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Wearable electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to the S-1009C17I-M5T1U are: - S-1009C18I-M5T1U: Similar specifications, but with an output voltage of 1.8V. - S-1009C16I-M5T1U: Similar specifications, but with an output voltage of 1.6V. - S-1009C15I-M5T1U: Similar specifications, but with an output voltage of 1.5V.
These alternative models provide options for different output voltage requirements while maintaining similar characteristics and functionality.
In conclusion, the S-1009C17I-M5T1U is a compact and efficient voltage regulator that offers stable voltage regulation, overcurrent protection, and thermal shutdown protection. Its wide input voltage range and small form factor make it suitable for various electronic applications. However, it has limitations in terms of output current capacity and dropout voltage. Alternative models with different output voltages are available to cater to specific requirements.
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan S-1009C17I-M5T1U dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of S-1009C17I-M5T1U in technical solutions:
Q1: What is S-1009C17I-M5T1U? A1: S-1009C17I-M5T1U is a specific model of a component or device used in technical solutions.
Q2: What is the purpose of S-1009C17I-M5T1U? A2: The purpose of S-1009C17I-M5T1U is to perform a specific function within a technical solution, such as voltage regulation or power management.
Q3: How does S-1009C17I-M5T1U work? A3: S-1009C17I-M5T1U works by receiving an input signal or power supply and regulating it to provide a stable output according to its specifications.
Q4: What are the key features of S-1009C17I-M5T1U? A4: Some key features of S-1009C17I-M5T1U may include high efficiency, low power consumption, small form factor, and overcurrent/overvoltage protection.
Q5: In which technical solutions can S-1009C17I-M5T1U be used? A5: S-1009C17I-M5T1U can be used in various technical solutions, including but not limited to consumer electronics, industrial automation, automotive applications, and telecommunications.
Q6: What are the advantages of using S-1009C17I-M5T1U in technical solutions? A6: Some advantages of using S-1009C17I-M5T1U include improved power efficiency, reliable voltage regulation, compact design, and protection against electrical faults.
Q7: What is the input voltage range supported by S-1009C17I-M5T1U? A7: The input voltage range supported by S-1009C17I-M5T1U may vary, but it is typically specified in the product datasheet. Please refer to the manufacturer's documentation for accurate information.
Q8: Can S-1009C17I-M5T1U handle high current loads? A8: Yes, S-1009C17I-M5T1U is designed to handle certain current loads as specified by its datasheet. It is important to ensure that the load does not exceed the device's maximum current rating.
Q9: Are there any specific application notes or guidelines available for using S-1009C17I-M5T1U? A9: Yes, the manufacturer of S-1009C17I-M5T1U usually provides application notes or guidelines that outline best practices and recommendations for integrating the device into technical solutions. These resources can be found on their website or obtained from their support team.
Q10: Where can I purchase S-1009C17I-M5T1U? A10: S-1009C17I-M5T1U can be purchased from authorized distributors or directly from the manufacturer. It is advisable to check the official website or contact the manufacturer for a list of authorized sellers.